LVDS Connector: EMBASE RJ45 CAT. 6
LVDS differential outputs must be terminated as follows:
The output level is adjusted around the typical 1.2 V offset, with a peak-to-peak amplitude varying from
250 mV to 450 mV.
2.2.2.2.1
Channel A & Channel B I/Os description
The Outputs of the demodulators depend on:
the selected option
the demodulation mode
the selected soft decision output
the selected Data format output (CADU)
and the setting of the Output Mode parameter
The following table shows the different configurations for both Demodulator A and Demodulator B
(standard outputs).
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
ZT = Termination impedance = 100
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
Date:
Safran Data Systems
This document is the property of
3.5
June 1, 2021
.
Page 65