Hardware Description; Cortex Hdr Integration; Hardware Configuration; Pc-Compatible Workstation - Safran CORTEX Series User Manual

2 H D
ARDWARE ESCRIPTION
2.1

CORTEX HDR INTEGRATION

2.1.1

Hardware Configuration

In its minimum hardware configuration, the HDR 4G unit consists in:
- one 4U-high PC-compatible workstation
one demodulator module with its I/O interfaces (LVDS-ECL interfaces)
-
Depending on the delivered configuration, optional hardware parts can be added to the unit and consist
in:
- test modulator board
custom I/O interface board
-
Dual port 10 Gigabit RJ45 copper or LC fiber-optic connectors (configuration dependent)
-
System storage: raid0 raid6 4 or 12 disk from 1Terra or 2Terra byte disk
-
The position of the boards inside the chassis must not be changed. A sticker at the rear panel of the
equipment shows how the boards must be mounted in the chassis. Do not change this setting.
2.1.2

PC-compatible Workstation

The PC-compatible workstation cabling is described in Annex 4.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 58