4.5
CORTEX HDR GUI
4.5.1
Conventions &Warnings
I
N THE FOLLOWING SECTIONS
-
IS RED
MARKED WITH THE NAME OF A
OR ALARM IN THE
The following marks are used:
(SWID)
: Refer to the Software & ICD Version ID table
(GLOB) : Refer to the Global CORTEX table
(DMU)
: Refer to the Demodulator Unit table
(DPU)
: Refer to the Data Processing Unit table
(DCU)
: Refer to Diversity Combining Unit table
(MGLO) : Refer to the Modulator Global table
(DGU)
: Refer to the Data Generating Unit table
(MDU)
: Refer to the Modulating Unit table
(IFO)
: Refer to the IF Output table
(CHM)
: Refer to the Channel Modeling table
(MFI)
: Refer to the Modulator Format Input table
(MFO)
: Refer to the Modulator Format Output table
(DRG)
: Refer to the Data Recording Global table
(DRU)
: Refer to the Data Recording Unit table
(PLBK)
: Refer to the Playback Unit table
(PROJ)
: Refer to the Project-specific table
P
ROGRAMMING PARAMETERS DEFINED AS FLOAT VALUES IN THE INTERFACE CONTROL DOCUMENT
PARAMETERS DEFINED AS INTEGER VALUES MUST BE ENTERED IN REAL FORMAT
P
ARAMETERS MARKED
IN HEXADECIMAL FORMAT
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
,
EACH CONFIGURATION PARAMETER
CORTEX «
UNIT
E
I
THERNET
NTERFACE
CAN BE ENTERED IN FLOAT OR REAL FORMAT
«
»
G
HEX
IN THE
RAPHICAL USER INTERFACE MUST BE ENTERED
. O
THER PARAMETERS MUST BE ENTERED IN DECIMAL FORMAT
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
Date:
,
STATUS OR ALARM
». T
HIS MARK ALLOWS TO LOCATE THE PARAMETER
C
D
ONTROL
OCUMENT IN
(
A
SEE
NNEX
Safran Data Systems
This document is the property of
3.5
June 1, 2021
,
STATUS
A
1.
NNEX
1).
.
.
.
Page 232