Monitoring (Transport Layer Window); Ber" Windows; Figure 134: Dpu: Ber Window - Safran CORTEX Series User Manual

4.5.5.2.2

Monitoring (Transport Layer Window)

Unless otherwise specified, status & alarms in this window are described in DPU.
DROP OUT COUNTER
CORRECTED ERRORS
BIT ERROR RATE
IDLE COUNTER
GOOD FRAMES
BAD FRAMES
TRANSPORT LAYER
Note: When the frame synchronizer of the CADU layer is lock, the status of the counters in the
Transport layer can be updated or not. That is controlled by a Registry key
(PermanentTransportStatus).

"BER" Windows

4.5.5.3
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Number of frame drop-out events at transport layer level
Number of bits corrected by the decoder at transport layer level
Bit error rate at transport layer level
Number of received idle frames at transport layer level
Number of good frames
Number of bad frames (could not be corrected)
Frame Synchronizer status. From left to right:
Search, Check, Locked or Flywheel
Data or Idle frames

Figure 134: DPU: BER Window

It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev
Date:
Safran Data Systems
This document is the property of
3.5
June 1, 2021
.
Page 297