Standard Ftp Ccsds Mode - Safran CORTEX Series User Manual

There is one line per TM file in the ASCII report file. Each line is composed of 5 fields separated by '; ' .
The number of TM blocks in the file,
The number of TM blocks not corrected in the file,
The date of the first TM block in the file,
The date of the last TM block in the file,
The full path and name of the file.
3.4.11.4.2

Standard FTP CCSDS mode

The standard mode delivered with the FTP functionality is the sorting and storage of received CCSDS
VCDU.
In this mode, 64 directories for the storage of the data are created (VC_00 to VC_63) per defined
reception channel. Each directory corresponds to a given VCID.
Only the Sort A operation is used (the other filtering and sorting operations are disable by set-up in the
FTP window). The Sort A operation consists in extracted from each received CADU its VCID and
comparing it with the different possible VCID values (from 0 up to 63), its operation is defined inside the
configuration file: SORT_A_0.txt. The VCDU are store inside dedicated files in their corresponding
directories and put at the disposal of remote Users using a FTP client software.
For each session a corresponding report file is generated included information on the recorded files.
These files are store in specific directories.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 135