1.3.3
Telemetry Demodulation
Input frequency:
720 MHz nominal, tunable between 530 and 910 MHz
1.2 GHz nominal, tunable between 910 MHz and 1490 MHz
2.4 GHz nominal, tunable between 1,65 GHz and 3.15 GHz
1.25 GHz nominal, tunable between 500 MHz and 2400 MHz
Automatic carrier acquisition
BPSK, QPSK, OQPSK (SQPSK), UQPSK (AQPSK, AUQPSK, AUSQPSK), 8PSK, GMSK,
SOQPSK, 16QAM, 16APSK, 32APSK, 64APSK 128 APSK 256APSK demodulation
Equalization filter: static or auto-adaptive (DEAF)
Automatic compensation for cross-polarization perturbations(XDEAF)
Adjacent channel rejection filters
Bit synchronization
Fully digital matched and shaped filters: Raised Cosine, Root Raised Cosine, GMSK, SOQPSK
shaping filter (CCSDS and IRIG standard), User defined
Viterbi decoding: single or dual mode, ½ (+ puncture) or ¼ rate, single or parallel processing
(stacked Viterbi)
De-scrambler: CCITT V.35 and Intelsat V.35
4D-TCM (Trellis Coded Modulation) decoding
DVB-S2, DVBS2X, SCCC and SCCC-X standards supported
Multiple Demodulation capability up to 8
1.3.4
Telemetry Processing
Multi-channel architecture (up to 8 parallel channels – Multi DPU processing)
Transport Layer for RS DVB or LDPC decoders (Asynchronous decoding layer)
CADU Frame synchronization (CCSDS Transfer layer)
Data time-tagging (internal, external IRIG B signal or external NTP server)
De-randomization, De-interleaving, Virtual filling, Reed-Solomon decoding (supported standard:
CCSDS, DVB-S, ECSS)
CRC frame checking
CCSDS Low Density Parity Check decoding (LDPC 7/8, AR4JA ½ 2/3 4/5 )
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
3.5
Date:
June 1, 2021
Safran Data Systems
.
Page 32