Mtdi (Multiple Tabbed Document Interface); Figure 83: Multiple Tabbed Document Interface - Safran CORTEX Series User Manual

After the connection is established the host identification zone becomes gray. Changing the IP address
is no more possible unless the
Next sections describe the commands and statuses available from the MCS window after the
connection is established.
4.3.5.2

MTDI (Multiple Tabbed Document Interface)

The MCS software is based on MTDI (Multiple Tabbed Document Interface) space. The MTDI enables
to separate in different working spaces the MCS Documents. Every document is identified by the host
name and shows all the windows corresponding to this connection. The tabs enable to go from a
working space to another. The tabs can be placed either at the bottom or right side (default setting) of
the MCS window (menu PREFERENCES).
The tabs enable to know the status of the connection and host CORTEX:
 in black on green back
 in white on red back : MCS is connected and host CORTEX is in alarm,
 in blue on gray back : MCS is disconnected.
In case of host CORTEX alarm the tabs turn to red.
Another option enables to display on the tab the name of the host machine or MCS Document (menu
PREFERENCE).
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
disconnect button is pressed.

Figure 83: Multiple Tabbed Document Interface

: MCS is connected and host CORTEX is OK,
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 216