4.5.5.5.2
Telemetry Blocks Quick Look
Telemetry Blocks are displayed back to back on the Quick Look window.
Offset 0000 marks the beginning of a Telemetry Block.
Telemetry Blocks are structured as follows (see section 3.4.11 : for more details):
Telemetry frame:
Synchronization Word + telemetry frame (if frame synchronizer ON) or raw data (if frame
synchronizer OFF). At the end of the frame, spare bytes for 8 bytes alignment (if required). These
added spare bytes can have any values.
TM Block time tag (8 bytes):
Bits D0-31 (offset N): number of seconds elapsed since January 1st, 00:00:00 of current year
Bits D32-63 (offset N+1): number of microseconds in the current second
Both 32-bit fields are integers coded in hexadecimal form.
The time tag can be disabled by set-up (refer to "Real Time Frame" window: disable frame datation).
Telemetry Block status (8 bytes): the Telemetry Block status is captured and displayed in this field
only if the frame synchronizer is ON.
Optional spare field (from 0 to 8 words of 8 bytes): the number of spare data words (64 bit words) is
selected in the "Real Time Frame" Window. These data words are filled with "00000000" values.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
TM Block 1
TM Block 2
... /...
TM Block N
Figure 137: Telemetry Block Description
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
3.5
Date:
June 1, 2021
Telemetry Frame :
Synchronization Word
& Data Words
(8 Bytes aligned)
Time Tag
(8 Bytes)
Status
(8 Bytes)
Optionnal spare field
(0 to 8 words
of 8 Bytes)
Safran Data Systems
.
Page 302