4.5.9
Playback Windows
"Global" Window
4.5.9.1
4.5.9.1.1
Configuration and control
Parameters in this window are described in
To start the replay, the HDR must be set in "Acquisition" mode.
START TIME
STOP TIME
B
R
IT
ATE
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Figure 185: Playback: Global Window
PLBK
Enables to define an automatic starting date for the replay.
Must be selected to be active.
Enables to define an automatic stop date for the replay.
Must be selected to be active.
Manual start of the replay.
Manual stop of the replay.
Selects the bit rate of the playback only used in "Data+Clock" mode.
Important: In "Test modulator" mode, the bit rate of the playback is the bit
rate set in the test modulator window.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
3.5
Date:
June 1, 2021
Safran Data Systems
.
Page 345