Remote Control Interface - Safran RX-1 User Manual

6 R C
EMOTE ONTROL
Either by connecting a keyboard and display to the RX-1 receiver or by installing the MCS software
on a remote computer, it is possible to access to a graphical user friendly and intuitive interface.
The RX-1 Compact Operational Receiver has two physical independent RJ45 connectors to allow
Monitoring and Control of the receiver and transmission of TM data on separate networks.
The RX-1 has an independent network configuration on each Ethernet interface.
The description of the Remote Control Interface is described in [AD5].
The graphical interface should be used carefully.
The RX-1 has been designed with dedicated outputs to limit operator's access.
Hence the graphical interface should be considered as an expert interface and the user should avoid
using at the same time the local interface (front panel) and the graphical interface. The use of both
interfaces may generate system instability.
In that case, CTX and MCS files should be deleted and the unit restarted to recover a default
configuration
For a detailed description of the Graphical User Interface, refer to [AD5]
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
I
NTERFACE
Ref.
Is.Rev
Previous Ref.:
Date:
Safran Data Systems
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
D104047
08
-
21/06/2021
.
Page 95