"Config" Window
4.5.3.4
4.5.3.4.1
Control
UNIT MOUNTED
TESTS NUMBER
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Figure 92: CORTEX HDR: Config. Window
Identification of the mounted units in the current configuration. A green LED
indicates that the unit is mounted and enabled. A unit can be enabled or disabled
by clicking in the associated selection box:
DMU: Demodulator Unit
DPU: Data Processing Unit
DRU: Data Recording Unit
TSTU: Test Modulator Unit
PLBK: Playback Unit
Reserved for internal tests.
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
Date:
From the window opposite, the User
can monitor & control miscellaneous
system parameters.
Parameters, status and alarms in this
window are described in
Safran Data Systems
This document is the property of
3.5
June 1, 2021
GLOB.
.
Page 244