Monitoring; Upper Banner; Recorder Status - Safran CORTEX Series User Manual

The recording cannot be started as long as the HDR is not set in "Acquisition" mode; use the
button to switch from "Configuration" mode to the "Acquisition" mode.
4.5.7.2.2

Monitoring

Status & alarms in this window are described in DRU.
4.5.7.2.2.1

Upper Banner

See section 4.5.4.1.2.1 .
4.5.7.2.2.2

Recorder Status

 Session Status:
RECORDED DATA
NBR. OF RECORDED FILES
DATE OF FIRST BLOCK
DATE OF LAST BLOCK
 TM Status:
CTRL/PART
 Disk Information:
CAPACITY
OCCUPIED
FREE
NUMBER OF SESSION
 TM Information:
FILE SIZE
FILE HEADER
BLOCK SIZE
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Amount of recorded data for the current recording session. Expressed in
Mbytes
Recorded TM file number for the current recording session. 0 to N
Time-tag of the first recorded TM Block for the current recording session
Time-tag of the last recorded TM Block for the current recording session
Active hard disk controller (0 or 1) / Active hard disk partition (1 to 64)
Total data recording capacity for both hard disk controllers (in Mbytes)
Occupied capacity for both hard disk controllers (in Mbytes)
Free capacity for both hard disk controllers (in Mbytes)
Number of recording sessions on the disk
Size of the TM File (in bytes). This value corresponds to the TM block size
multiplied by the value set in "TM block per".
TM File header
TM Block size (in bytes). Up to 1,048, 656 bytes. This value corresponds to
the defined frame (CADU) size plus a few bytes of time tagging and frame
sync. Status.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 314