4.5.8.3.3
Status and Warnings
The upper banner indicates the Warning status: OK (green display) or ERROR (red display) for IF 1, IF
2 and CHM.
When pointing at the banner, more information about the Warning is displayed.
In the "IF" Window, a status is placed under each contribution of each MDU for each IF. It indicates
either "Noise Off" when Noise Generator is disabled for this IF, either an estimation of the E
on the IF Level, the Noise Level and the Bit Rate.
In the "Doppler/XPOL" Window, when Doppler is active, several status indicate the actual rate and
offset in real time.
In "Doppler/XPOL" Window, when XPOL is active in File Mode, several status indicate actual XPIC and
Phase in real time.
The "PLAY" button
The "STOP" button
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Figure 170: IF Warnings
Figure 171: Eb/N0 status
Figure 172: Doppler status
Figure 173: XPOL status
starts playing the file.
stops playing the file.
Ref.
Is.Rev
Date:
Safran Data Systems
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
DTU 100782
3.5
June 1, 2021
/N
b
0
.
based
Page 339