Vector analysis:
I & Q values and associated signal-to-noise ratio (Eb/No) are displayed for each
quadrant.
Signal analysis:
IF level gives the level of the input signal.
Nb Vector gives the number of displayed bursts of vector values.
Ampli. Err. And Phase Err. give respectively the RMS errors on the Amplitude and phase
measurements.
"Filter" Window
4.5.4.8
Time Display Mode:
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Figure 130: Filter: Time Display Selection
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
3.5
Date:
June 1, 2021
Safran Data Systems
.
Page 287