Safran CORTEX Series User Manual page 183

Registry
Storage
File Dir
StoreSize
StoreTotal
2 - To create the different flows:
PATH : [HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\Cortex Station\SetDefault\Log\10]
[HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\Cortex Station\SetDefault\Log\11]
[HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\Cortex Station\SetDefault\Log\12]
[HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\Cortex Station\SetDefault\Log\13]
Registry
EnableLog
FileConfig
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Type
DWORD To enable/disable global logging data storage on the disk
Default: 0
0 – Disable the storage capacity
1 – Enable the storage, start ON by default
2 – Enable the storage, start OFF by default
Si la clé « Storage » par défaut est positionnée à 0, le maillon
d'enregistrement ne sera pas créé et cela quel que soit la valeur des autres
clés.
Character To define the file default name and access path
s string Default setting at delivery: D:\ZDS\Data\Storage\Menu1\Log\Logging\LOG
DWORD To define the default maximum data file size
Default setting at delivery: 4096 (bytes)
DWORD To define the default total data record size
Default setting at delivery: 65536 (bytes)
Type
DWORD To enable/disable the specific additional data flow processing
Default: 0
0 – Disable the Specifics additional flow
1 – Enable the Specifics additional flow
Character To define the configuration file name and access path
string Default setting at delivery:
D:\ZDS\Data\CRT\SPS\Logging\Menu1\LogFlow10.txt
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev
Date:
Description / default value
Description / default value
Safran Data Systems
This document is the property of
3.5
June 1, 2021
.
Page 183