Lower Toolbar; Common Data - Safran CORTEX Series User Manual

4.3.5.4

Lower Toolbar

Hide or display the lower toolbar from menu PREFERENCE / TOOL BAR. The lower toolbar appears
on the screen only after the MCS is started.
4.3.5.4.1

Common Data

The following commands are common to all of the CORTEX products. For product specific commands,
see next section.
Same as command FILE - NEW.
Same as command FILE - OPEN.
Same as command FILE - SAVE.
Same as command FILE - PRINT.
Same as command HELP - ABOUT.
Update the MCS Table from the real configuration of the connected CORTEX.
Reconfigure the connected CORTEX from the active MCS Table.
Connect to the monitoring port of the CORTEX.
Close the connection to the monitoring port of the CORTEX.
Activate/inhibit the configuration mode. Password-protected function.
Open the TCP window.
Toggle command: open/close the connection to the Control port (see section 4.3.6.3 ).
Open the CTX Document management window (see section 4.3.9 ).
Open the MCS Menu Management window (see section 4.2.4.2 ).
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 219