Symbols Description - Safran CORTEX Series User Manual

SYMBOLS DESCRIPTION

The following symbols appear in this document and on the chassis:
Documentation must be consulted in all cases where this symbol is marked.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
ISO 7000-0434A
Caution: The exclamation point within an equilateral triangle
(2004-01)
is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
ISO 7000-0434B
literature accompanying the product.
(2004-01)
Caution, risk of electric shock: The lightning flash with an
arrowhead symbol within an equilateral triangle, is intended
to alert the user to the presence of uninsulated 'dangerous
IEC 60417-6042
voltage' within the product's enclosure that may be of
(2010-11)
sufficient magnitude to constitute a risk of electric shock to
persons.
Protective earth; protective ground: terminal is intended
IEC 60417-5019
for connection to an external conductor for protection
(2006-08)
against electric shock in case of a fault.
IEC 60417-5007
"ON" (power): indicate connection to the mains.
(2009-02)
IEC 60417-5008
"OFF" (power): indicate disconnection from the mains.
(2009-02)
IEC 60417-5032 Alternating current: the equipment is suitable for
(2002-10) alternating current only.
Disconnection, all power plugs: The equipement has
IEC 60417-6172
multiple power source. All power sources shall be
(2012-09)
disconnected before servicing to avoid shock hazard.
Altitude: Do not use at an altitude exceeding 2000m.
Tropical conditions: This product is not suitable for tropical
conditions.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 22