Logging Windows; Data Logging Control" Window; Control; Status - Safran CORTEX Series User Manual

4.5.10

Logging Windows

"Data Logging Control" Window

4.5.10.1
For details on the data logging function, refer to section 3.8 .
To control the data logging function, in the upper toolbar click on
logging control window:
4.5.10.1.1

Control

START / STOP
AUTOMATIC LOG
CONFIGURATION FILE
CHOOSE CHANNELS
4.5.10.1.2

Status

The status field can take the following values: Inactive, Running or Automatic. In case of a non-valid
configuration file number, Error is reported in this status field.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL

Figure 196: Logging status Window

Start or stop the data logging in manual mode.
If selected, the recording starts automatically with the Acquisition mode.
Select the number of the configuration file used for the current data logging
operation
Select the log(s) Log 1, Log 2, Log 3, Log 4, Log 5, Log 6, Log 7 and/or Log 8
for the current logging operation.
Open the editor window to configure a new configuration file (see next section).
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev
Date:
. This operation opens the data
Safran Data Systems
This document is the property of
3.5
June 1, 2021
.
Page 355