4.3.5.4.2
CORTEX HDR Specific Data
Restart signal acquisition by the Demodulator. Turns to yellow when the Demodulator is locked.
Turns to gray when the Demodulator is unlocked (see SPECIAL COMMAND - RESTART IFR).
Reset the BER counter for the active Demodulator Unit window or
Restart the status counter for the active Data Processing Unit window.
Close the TCP-IP connection for the active window. Turns to red when the connection is active and
to gray when the connection is closed (see SPECIAL COMMAND - CLOSE TCP)
Open the data logging set-up window (refer to Logging window)
Open the Disk Partitioning & Memory Allocation window.
Toggle command: select the Configuration or Acquisition mode.
In Acquisition mode, close all open data acquisition processes to toggle in Configuration mode.
Invert one bit in the simulated data pattern (pseudo-random pattern or file). Bit inversion takes
place before convolutional encoding (if enabled).
Allows the setting of a same parameter in all the active channels from a single window.
Recall the MCS Login window.
Load a User Configuration MCS file
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
3.5
Date:
June 1, 2021
Safran Data Systems
.
Page 220