Playback Function; Operating Modes; Figure 45: Playback Function: Test Modulator Operating Mode; Figure 46: Playback Function: Test Modulator Data + Clock Mode - Safran CORTEX Series User Manual

3.4.12

Playback function

3.4.12.1

Operating Modes

The Cortex HDR provides two different operating modes for the Playback function:
 Replay of data using the Test Modulator (Test Modulator mode). In this case the data are sent
to the Test Modulator for modulation and re-transmission at the IF level (720 MHz or 1.2 GHz).
The data can be demodulated by the Demodulators just as in real time reception.
 Replay of data at the ECL outputs (Data + Clock mode). In this case the data are sent directly to
the ECL outputs of the selected demodulator(s) in the selected output format. The Test
Modulator is not used nor the demodulation function of the Demodulators.

Figure 46: Playback function: Test Modulator Data + Clock mode

© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL

Figure 45: Playback function: Test Modulator operating mode

Ref.
Is.Rev
Date:
Safran Data Systems
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
DTU 100782
3.5
June 1, 2021
.
Page 138