Cortex Hdr Software; Local Or Remote M&C; Password Protection - Safran CORTEX Series User Manual

1.4.4

CORTEX HDR Software

The CORTEX HDR is supplied with two separate software packages:

Signal Processing Software package (SPS)

Monitoring & Control Software package (MCS)
These software are executed under the control of the Operating System. Software configuration at
delivery is described in Annex 5.
1.4.4.1 Local or Remote M&C
The Signal Processing Software and Monitoring & Control Software communicate by means of
connected sockets under TCP-IP protocol. As a result, the notion of local or remote M&C no longer
applies to the CORTEX HDR: since the MCS software package can be installed (free copyright) into
any PC-based computer(s), there is no difference between operating the equipment locally (front panel
keyboard and screen) or remotely, provided that the CORTEX HDR and the PC-based computer(s) are
connected to the same Ethernet network.
1.4.4.2

Password Protection

The following functions are password-protected:
 Cortex user login ;
 CORTEX HDR configuration;
 Reset of TCP-IP connections.
Default setting at delivery: cortex (login function). Other functions: no password.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 39