4.2.9.2.6
DNRZ PCM Decoding (deprecated)
Selecting the DNRZ code in QPSK and OQPSK demodulation mode:
Registry path:
HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Dmu#n
Keyword:
DNRZ_code
Default setting:
0
4.2.9.2.7
OQPSK (SQPSK) Algorithm
OQPSK demodulation algorithm definition
Registry path:
HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Dmu#n
Keyword:
Algo_OQPSK
Enter 0 for standard algorithm and 1 for enhanced algorithm (better resistance to pattern, but higher
synchronization threshold).
Default setting:
0.
4.2.9.2.8
DVB-S2 randomization polynomial
Selection of the randomization polynomial for DVB-S2 standard
Registry path:
HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Dmu#n
Keyword:
DVBS2_PIScrambling_Num
Enter 0 to 262141 (refer to the DVBS2 standard, document EN 302307 V1.1.1 § 5.55.4)
Default setting:
0.
4.2.9.3
Transport Layer: Frame Synchronizer Setting
4.2.9.3.1
Check to Lock Strategy (CTL) for RS DVB
Registry path:
HKEY_LOCAL_MACHINE/SOFTWARE/InSnec/CrtxHdr/SetDefault/Signal
Processing/Dpu#n
Keyword:
RSDVB_Ctl
Enter an integer value between 0 and 10.
Default setting:
2.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
DTU 100782
Is.Rev
3.5
Date:
June 1, 2021
Safran Data Systems
.
Page 205