DGU1
Max : 1,6 Gbps
DGU2
Max : 1,6 Gbps
DGU3
Max : 1,6 Gbps
Figure 59: Example of 3 DGUs merging for simulation of independent I/Q/C transmission in 8PSK
The total number of data units that can be connected simultaneously to a modulating unit can be 1, 2, 3
or 8.
Given a modulation order n (ex: 3 in 8PSK):
I/Q/C... synchronization is guaranteed only when the number of DGUs is equal to n
the convention for bit to symbol mapping is: DGU1 I, DGU2 Q, DGU3 C (or Z) and so
on.
Multi-DGU support is enabled by adjusting the number of DGUs in the modulator's GUI or the TCP/IP
interface.
Each data unit has an adjustable starting offset, in bits. This enables to offset multiple data streams
with a predefined scheme in order to ease multi-channel ambiguity resolution at the receiving end.
Offset DGU1
Offset DGU2
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
I
PCM
Q
TCM
C
ASM
ASM
ASM
Offset DGU3
Figure 60: Example of 3 DGUs with different offsets
Ref.
Is.Rev
Date:
8PSK
Symbols
Modulator
Max : 4,8 Gbps
data
data
data
Safran Data Systems
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
DTU 100782
3.5
June 1, 2021
To IF1 and/or IF2
.
Page 166