Mcs Interface For Ctx Document Management; Figure 85: Changing A Password - Safran CORTEX Series User Manual

Notes:
1. The Control password does not protect the CORTEX from re-configuration by remote Control
Clients.
2. The TCP-IP password does not protect from reset commands issued by remote Reset Clients.
4.3.9

MCS Interface for CTX document management

Click on to access the CTX Document management window, which enables to save up to 127
different configurations:
 Click on
and enter the password enabling the Load , Save and Delete commands
 To create a new CTX Document, click on New and enter the name (maximum name size: 16
characters), and the number (0 to 127) of the new CTX document
 Click on Save to capture the current CORTEX configuration and save it to an existing CTX
Document on the disk
 Click on Load to load a CTX document in the current CORTEX configuration.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL

Figure 85: Changing a Password

This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 225