Specific Operating Mode: Playback Lan; Figure 195: Playback Lan: Overrun Option - Safran CORTEX Series User Manual

With "Report TM" mode:
CONTROLLER
PARTITION
FILE NBR.
With "BER File" mode:
MODE
FILE NUMBER
4.5.9.2.3

Specific operating mode: Playback LAN

In "Playback LAN" mode, user can choose the behavior if overrun is detected:
- Default: overrun counter is incremented and session continues.
- Stop on overrun: user is disconnected from Playback port (PBK-1 or PBK-2), session is
immediately stopped and all remaining data are flushed.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Selection of the Controller for the replay.
Selection of the Partition for the replay.
Selection of the file number for the replay: 1 to N. The file must be recorded in the
"PLAYBACK" directory of the selected partition.
BER measurement mode (simulated data for BER analyzis):
 File
Simulated data from a file on the disk
 PseudoDxx Pseudo random data, using from PN generator xx
(where xx = 10, 11, 15 or 23. See Section 3.6.1.1.1 )
Selection of the simulation number: 1 to N.

Figure 195: Playback LAN: Overrun option

This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 354