Implementation Loss - Safran CORTEX Series User Manual

Operating @ 1.2 GHz +/-300MHz IF input):
Operating @ 2.4 GHz IF input:
Synchronization threshold
Acquisition time
Doppler measurement
Doppler rate
IF level measurement accuracy
Cable Equalizer (note 1)
1.6.1.3

Implementation loss

Implementation losses:

are given in dB to theoretical value;

take into account all part HDR 4G part the unit filter/demodulator/decoding...;

are given with actual BER measurement using a SDSY Test modulator assuming
no implementation loss @ SDSY test modulator.
<1dB at @ 90% of max value of Bit Rate value
<0,5dB @ 50% of max value of Bit Rate value
<0,3dB @ 25% of max value of Bit Rate value
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Maximum actual symbol rate
Maximum Bit rate in BPSK mode
Maximum Bit rate in QPSK modes
Maximum bit rate in 8PSK mode
Maximum bit rate in 16QAM / 16APSK, 32APSK,
64APSK mode
Maximum actual symbol rate
Maximum Bit rate in BPSK mode
Maximum Bit rate in QPSK modes
Maximum bit rate in 8PSK mode
Maximum bit rate in 16QAM / 16APSK, 32APSK,
64APSK mode
 1dB (Eb/No) in QPSK,  3,5dB (Eb/No) in 8PSK
 0.25 second
Yes
 10 kHz/s
 2 dB
Yes. Amplitude equalization: 0 to 12 dB between 570 & 870 MHz
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev
Date:
Safran Data Systems
This document is the property of
3.5
June 1, 2021
500 Msps
500 Mbps
1000 Mbps
1500 Mbps
2000 Mbps
1.2 Gsps
1.2 Gbps
2.4 Gbps
3.6 Gbps
4.8 Gbps
.
Page 45