If Filter - Safran RX-1 User Manual

5.2.3

IF Filter

By default, the IF filter is set-up automatically according to the Mode and Bit Rate. The effective
IF filter Bandwidth is noted in the Main Menu. For instance, in SOQPSK-TG with 10 Mbps, the
Effective IF Filter bandwidth selected automatically is 8 MHz (i.e. 99% percent of the energy is
concentrated in 0.78 x the bit-rate for SOQPSK modulation):
The automatic selection can be overridden by selecting the IF filter line and opening the IF Filter
prompt window:
The list of available IF Filters is described in [AD4].
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Figure 21: RX-1 IF Filter selection window
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104047
Is.Rev 08
Previous Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 55