Data Output Settings - Safran RTR-NeXt User Interface Manual

4.7.20

Data Output Settings.


Activate output

Load specific settings

Single-Click on the button will open the following
pop-up window to fully configure settings

Source / Signal Selection - Inversion settings are
displayed dynamically from the specific settings.
If Signal selected is disabled, label "DISABLED" is

added.

Bit sync Output Format.

ACG Data Stream
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 157