5.5
Cortex RTR Software Installation.
Each RTR comes with a nominative CD-ROM; its serial number is written down.
Do not use for software RE-installation a CD-ROM from another chassis, otherwise software and
It is possible to use a "global license" CD-ROM if the serial number of the concerned RTR is
5.5.1
Installation Files Structure.
The installation CD-ROM presents a structure such as the one described below:
The installation software is located in the subdirectory install.
5.5.2
Software installation procedure.
Prerequisite: You must be logged as "cortexadmin". Close all Radio Telemetry Receiver application before
running installation or uninstallation.
1.
Run the executable file named:
"setup_RTR_FULL.exe".
2.
The following window should appear:
Click on "Yes" to run installation
3.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
IMPORTANT WARNING:
hardware conflicts will occur.
EXCLUSION:
written on the CD-ROM label.
Cortex RTR software Installation – UAC.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104004
Is.Rev
07
Previous Ref.:
DTU000567
Date:
21/06/2021
Safran Data Systems
.
Page 47