Standard 19" Rack Integration - Safran CORTEX RTR NeXt Series User Manual

Standard 19" rack integration

3.4
The RTR has been designed to be integrated in a standard 19" rack.
Because of its weight, it is necessary that the RTR rests on brackets in the Bay.
Four holes (  M6x16CB ) are available at the front to fix the unit to the rack.
It is also possible to mount the unit on sliding rails by fixing them on the five holes available on each
side of the chassis.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Safran Data Systems
.
Page 30