Determine The Ip Address Of Your Pc And Change It If Required; Figure 15: Properties Of Your Lan Connection - WAGO I/O System 750 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
3.2.3.1

Determine the IP address of your PC and change it if required

The explanation below describes how to determine the IP address currently set for
your PC and how to change it if required.
1. Connect the ETHERNET port of your PC to one of the two ETHERNET
ports of the fieldbus controller using the patch cable provided with the
system in order to set up an ETHERNET link.
2. The IP address for your computer can be determined in Windows at:
Start > Control panel > Network and release center > Change adapter
settings > LAN connection.
Right click on the option PROPERTIES for the network you are currently
using (LAN connection X).
3. Mark the item "Internet Protocol Version 4 (TCP/IPv4)" in the popup list
and confirm by clicking [PROPERTIES].

Figure 15: Properties of your LAN connection

Quickstart Reference
Version 1.0.0
Quickstart Description 23