78
Commissioning
8.2
Determining the IP Address of the Host PC
To ensure that the host PC can communicate with the controller via ETHERNET,
the host PC and controller must be located in the same subnet.
To determine the IP address of the host PC (with the Microsoft Windows
operating system) using the MS DOS prompt, proceed as follows:
1.
Open the MS DOS prompt.
Enter the "cmd" command in the input field under Start > Windows
System > Execute (Windows
(Windows
2.
Click [OK] button or press [Enter] to confirm the entry.
3.
Enter the "ipconfig" command at the command prompt.
4.
Press [Enter] to confirm the entry. The IP address, subnet mask and
standard gateway, including the appropriate parameters, are displayed.
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
®
7).
®
WAGO I/O System Compact
751-9301 Compact Controller 100
10) or Start > Search programs/files
®