Table of Contents
Advertisement
5 Using the System Functions
optimized for connecting your instrument to a site network. They should also work well for other
network configurations.
Using the Web Interface
Your power analyzer has a built-in Web interface that lets you control it directly from the Web browser
on your computer. With the Web interface, you can access the front panel control functions including
the LAN configuration parameters. Up to six simultaneous connections are allowed. With multiple
connections, performance will be reduced.
The built-in Web interface only operates over the LAN. It requires a web browser.
The Web interface is enabled when shipped. To launch the Web interface:
1. Open the Web browser on your computer.
2. Enter the instrument's hostname or IP address into the browser's address field. The following
home page will appear.
3. Click on the Control Instrument tab on the top of the page to begin controlling your instrument.
4. For additional help about any of the pages, click on the ? icon.
If desired, you can control access to the Web interface by enabling or disabling Web control under
LAN Services (see
Securing the
186
LAN).
Keysight N6705C Operating and Service Guide
Advertisement
Table of Contents
Troubleshooting
