Arb Parameter Reference
Common
Constant-Dwell
Exponential
Pulse
Ramp
Sine
Staircase
Step
Trapezoid
User-Defined
Arb Sequence
Common Parameters
The following properties are common to most Arb functions:
Parameter
Return to DC Value
Last Arb Value
Edit Points
Continuous
Repeat Count
Close
From the remote interface:
The parameter setting returns to the DC value that was in effect prior to the Arb.
Keysight N6705C Operating and Service Guide
Description
The parameter setting returns to the DC value that was in effect prior to the Arb.
The parameter setting remains at the last Arb value after the Arb completes.
Create a user-defined Arb from the present Arb property values. This lets you edit specific points in the
standard arbitrary waveform.
Check to repeat the Arb continuously.
The number of times the Arb repeats. Except for CD Arbs, the maximum repeat count is about 16 million.
The maximum repeat count for voltage and current CD Arbs is 256.
Saves and closes the Properties window.
3 Using the Source Functions
109