Keysight Technologies N6705C Operating And Service Manual page 293

Parameter
(none)
Read status byte: *STB?
The status summary bits are cleared when the appropriate event registers are read. The MAV bit
l
is cleared at power-on, by *CLS, or when there is no more response data available.
When a serial poll is conducted in response to a service request, RQS is cleared, but MSS is not.
l
*TRG
Trigger Command. Generates a trigger when the trigger system has BUS selected as its source. The
command has the same affect as the Group Execute Trigger (<GET>) command).
Parameter
(none)
Generates an immediate trigger: *TRG
*TST?
SelfTest Query. Performs an instrument selftest. A 0 (zero) indicates the instrument passed selftest. If
selftest fails, one or more error messages will provide additional information. Use
read the error queue. See
Parameter
(none)
Perform selftest: *TST?
*TST? also forces an *RST command.
l
*WAI
Pauses additional command processing until all pending operations are complete. See
information.
Parameter
(none)
Wait until all pending operations complete.*WAI
*WAI can only be aborted by sending the instrument a
l
Keysight N6705C Operating and Service Guide
SCPI Error Messages for more information.
7 SCPI Programming Reference
Typical Return
<bit value>
Typical Return
(none)
Typical Return
0 or 1
Typical Return
(none)
Device Clear command.
SYSTem:ERRor? to
*OPC for more
293