Keysight Technologies N6705C Operating And Service Manual page 449

9 Service and Maintenance
Step 4. Remove the AC Module
Step 5. To install the AC module, perform the above steps in reverse order.
Removing/Installing the Bulk Supply (0950-5355)
Step 1. Remove the top chassis, Processor Carrier PCA, Bias PCA, and AC Module as previously
described.
Step 2. Remove one screw using a T10 driver from the rear panel.
Step 3. Unhook the cable tie and remove four screws using a T20 driver.
Keysight N6705C Operating and Service Guide 449