Keysight Technologies N6705C Operating And Service Manual page 302

7 SCPI Programming Reference
Parameter
(none)
Returns the measured high level current MEAS:CURR:HIGH? (@1)
Returns the measured high level voltage MEAS:VOLT:HIGH? (@1)
MEASure[:SCALar]:CURRent:LOW? (@<chanlist>)
MEASure[:SCALar]:VOLTage:LOW? (@<chanlist>)
Initiates, triggers, and returns the Low level of a pulse waveform. Values returned are either in
amperes, or volts. See Measurement Data
each channel specified. Multiple responses are separated by commas.
Parameter
(none)
Returns the measured low level current MEAS:CURR:LOW? (@1)
Returns the measured low level voltage MEAS:VOLT:LOW? (@1)
MEASure[:SCALar]:CURRent:MAXimum? (@<chanlist>)
MEASure[:SCALar]:VOLTage:MAXimum? (@<chanlist>)
MEASure[:SCALar]:CURRent:MINimum? (@<chanlist>)
MEASure[:SCALar]:VOLTage:MINimum? (@<chanlist>)
Initiates, triggers, and returns the maximum or minimum values of a measurement. Values returned
are either in amperes, or volts. The reading is in the form +n.nnnnnnE+nn for each channel specified.
Multiple responses are separated by commas.
Parameter
(none)
Returns the measured minimum current MEAS:CURR:MIN? (@1)
Returns the measured minimum voltage MEAS:VOLT:MIN? (@1)
Returns the measured maximum current MEAS:CURR:MAX? (@1)
Returns the measured maximum voltage MEAS:VOLT:MAX? (@1)
MEASure:ARRay:CURRent[:DC]? (@<chanlist>)
MEASure:ARRay:VOLTage[:DC]? (@<chanlist>)
MEASure:ARRay:POWer[:DC]? (@<chanlist>)
Initiates and triggers a measurement; returns a list of the digitized output measurement samples.
Values are either in amperes, volts, or watts.
The sampling rate is set by SENSe:SWEep:TINTerval. The position of the trigger relative to the
beginning of the data buffer is determined by SENSe:SWEep:OFFSet:POINts. The number of points
returned is set by SENSe:SWEep:POINts.
302
Typical Return
<HIGH value>
Formats. The reading is in the form +n.nnnnnnE+nn for
Typical Return
<LOW value>
Typical Return
<MIN value>
<MAX value>
Keysight N6705C Operating and Service Guide