Connectors, E7770A Common Interface Unit (Ciu) For The S9106Ac-2If 5G Fr1 Multi-Port Transceiver; Connectors, E7770A-La2 Ciu Lo Card - Keysight Technologies S9106AC-2IF Startup Manual

3 Review Hardware
3. 2. 6 Connectors, E7770A Common Interface Unit (CIU)
for the S9106AC-2IF 5G FR1 Multi-port Transceiver
3. 2. 6. 1 Connectors, E7770A-LA2 CIU LO Card
The E7770A-LA2 CIU LO Card provides the conversion frequency
used when up-converting 7 to 15 GHz signals from the M9410A PXIe VXT.
30 Keysight S9106AC-2IF and S9106AC-4UP 5G FR1 Multi-port Transceiver Solutions, Startup Guide
The E7770A Common Interface Unit (CIU) is only included in
Keysight S9106AC-2IF 5G FR1 Multi-port Transceiver
configurations.
If using a Keysight S9106AC-4UP 5G FR1 Multi-port Transceiver
configuration, proceed to
Status LED
Locked (Green)
10 MHz In
Connector
Frequency
LO Aux Out
Connector
Ref Out
Connector
CLK In
Connector
LO Out
Connector
Install Hardware on page 35.
On, indicates LO Card is locked to the 10 MHz In.
If LED is Red, LO Card is not locked to the 10 MHz In.
BNC (f), 50 Ω, nominal
10 MHz reference signal input
SMA (f), 50 Ω, nominal
LO Card LO Aux Out to LO Distribution Card LO In.
This connection supplies the local oscillator signal
to Channel Cards, through the LO Distribution Card.
SMA (f), 50 Ω, nominal (Intended for future use.)
SMA (f), 50 Ω, nominal (Intended for future use.)
SMA (f), 50 Ω, nominal
This connector supplies the local oscillator output
for use with a second (independent) LO source.