Meter View - Keysight Technologies N6705C Operating And Service Manual

Meter View

Press Meter
View
This key
toggles
between
multiple and
single output
views.
1. Output Identifies the output. When an output is selected, the background becomes highlighted. The selected output is displayed in an
Identifier enlarged format in single output view.
2. Output Off: the output is off
Status CV: the output is in constant voltage mode
CC: the output is in constant current mode
Unr: the output is unregulated
CP+, CP–: a positive or negative power limit
CL+, CL–: a positive or negative current limit
VL+, VL–: a positive or negative voltage limit
3. Output Displays the actual output voltage and current. Displays power in single output view.
Meter
4. Output Displays the present output voltage and current settings. Turn the front panel voltage or current knob to adjust these settings.
Setting Can also be changed using the numeric keypad.
5. Remote Error – an error has occurred (press the Menu key, select Utilities, then Error Log)
Status LAN – the LAN is connected and has been configured
IO – there is activity on one of the remote interfaces
6. Model Identifies the model number of the power module connected to this output.
Number
7. Arb, Delay, Displays the Arb waveform that is presently configured for this output. If no Arb is configured, no waveform will be displayed.
& Slew Rate Also displays the Output On and Output Off delay settings as well as the slew rate setting.
8. Polarity Indicates that the output and sense polarities are reversed.
Reverse
9. Ratings & Displays the maximum voltage and current ratings of the output. Also displays the present over-voltage protection setting
Protection and whether over-current protection is on or off.
10. Other Displays the actual voltage, current, and status of the other outputs.
Outputs
Keysight N6705C Operating and Service Guide
Multiple Output View Single Output View
OV: over-voltage protection tripped
OV–: negative voltage protection tripped
OC: over-current protection tripped
OT: over-temperature protection tripped
PF: a power-fail condition occurred
Inh: an external inhibit signal is received
Osc: the oscillation protection tripped
Prot: a coupled output protect occurred
1 Quick Reference
19