Table of Contents
Advertisement
5 Using the System Functions
Specifying User Preferences
Front Panel Preferences
Front Panel Lockout
Clock Setup
*IDN Setup
To configure the User Preferences, press the Menu key, scroll down and select the Utilities item, then
select User Preferences. Then scroll to and select one of the following User Preferences:
Front Panel Preferences
The power analyzer has a front panel screen saver that increases the life of the LCD display by turning
it off during periods of inactivity. As shipped from the factory, the screen saver comes on one hour after
activity on the front panel or interface has ceased.
When the screen saver is active, the front panel display turns off, and the LED next to the Line switch
changes from green to amber. To restore the front panel display, simply press one of the front panel
keys.
Enable Screen Saver - check to enable the screen saver. Uncheck to disable the screen saver.
Wait - when Screen saver is enabled, enter a value in minutes in this field to specify the time when the
screen saver will activate. The wait can be set from 30 to 999 minutes in 1 minute increments.
Keysight N6705C Operating and Service Guide
175
Advertisement
Table of Contents
Troubleshooting
