Change Password - Keysight Technologies N6705C Operating And Service Manual

5 Using the System Functions
When you have completed the license request, a license key will be sent to your email. Enter the
Access Key into the Key field of the Install Options window shown above.

Change Password

To password-protect or change the password for the Administrative Tools menu, log into the
Administrative Tools menu as previously described. Select Change Password. Select a password that
is numeric and up to 15 digits long. Enter it into the PIN field and then select Change Pin.
When done, select Administrator Login/Logout to log out of the Administrative Tools menu and
activate the password. You can now only enter the Administrative Tools menu by providing the new
password.
If the password is lost or forgotten, access to the Administrative Tools menu can be restored by
setting an internal switch to reset the password to 0. If the message "Locked out by internal switch
setting" or "Calibration is inhibited by switch setting" appears, the internal switch is set to prevent the
password from being changed (refer to the calibration switches section).
Keysight N6705C Operating and Service Guide 181