Command Quick Reference - Keysight Technologies N6705C Operating And Service Manual

1 Quick Reference

Command Quick Reference

Some [optional] commands have been included for clarity. All settings commands have a
corresponding query. See the
ABORt
:ACQuire (@chanlist)
:DLOG
:ELOG (@chanlist)
:HISTogram (@chanlist)
:TRANsient (@chanlist)
CALibrate
:COUNt?
:CURRent
[:LEVel] <value>, (@channel)
:LIMit
:NEGative <value>, (@channel)
:POSitive <value>, (@channel)
:MEASure <value>, (@channel)
:PEAK (@channel)
:DATA <value>
:DATE <"date">, (@channel)
:DPRog (@channel)
:LEVel P1|P2|P3
:PASSword <value>
:RESistance 20 | 6, (@channel)
:SAVE
:STATe 0|OFF|1|ON
:VOLTage
[:LEVel] <value>, (@channel)
:CMRR, (@channel)
:LIMit
:POSitive <value>, (@channel)
:MEASure <value>, (@channel)
:AUXiliary, (@channel)
DISPlay
[:WINDow]
[:STATe] 0|OFF|1|ON
:VIEW METER1 | METER4
26
Syntax Conventions for SCPI.
Cancels any triggered measurements.
Stops internal data logging.
Stops external data logging.
Stops the histogram current measurement. (only on N6781A/82A/85A/86A)
Cancels any triggered actions.
Returns the number of times the unit has been calibrated.
Calibrates the current programming.
Calibrates negative current limit. (only on N678xA SMU, N6783A)
Calibrates positive current limit. (only on N678xA SMU)
Calibrates the current measurement.
Calibrates peak current limit (only on N675xA, N676xA)
Enters the calibration value read by the external meter.
Stores the calibration date in nonvolatile memory.
Calibrates the current downprogrammer.
Advances to the next level in the calibration.
Sets a numeric password to prevent unauthorized calibration.
Calibrates the output resistance. (only on N6781A, N6785A)
Saves the calibration constants in non-volatile memory.
Enables or disables calibration mode.
Calibrates the voltage programming.
Calibrates the voltage common mode rejection ratio. (N675xA, N676xA)
Calibrates positive current limit. (only on N678xA SMU)
Calibrates the voltage measurement.
Calibrates the auxiliary voltage measurement. (only on N6781A, N6785A)
Turns the front panel display on or off.
Selects 1-channel or 4-channel meter view.
Keysight N6705C Operating and Service Guide