Accessories Troubleshooting
Information on This Chapter
Information on This Chapter
Use this procedure only if you have read
the procedures in the order given, unless instructed otherwise.
Measurement failures can be divided into two categories:
• Failures which don't affect the normal functioning of the analyzer but cause incorrect
measurement data.
• Failures which impede the normal functioning of the analyzer or prohibit the use of a
feature.
This chapter addresses the first category of failures which are usually caused by the
following:
• operator errors
• faulty calibration devices or connectors
• bad cables or adapters
• improper calibration techniques
• RF cabling problems within the analyzer
These failures are checked using the following procedures:
•
"Inspect and Gauge Connectors" on page 9-3
•
"Inspect the Error Terms" on page 9-4
9-2
Chapter 4 , "Start Troubleshooting Here."
8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
Follow
Service Guide