Fast Track to Rack Installation and Power
SUMMARY
This procedure walks you through the most basic
steps for installing your QFX5230-64CD switch in a
rack and connecting it to power.
Install the QFX5230-64CD Switch in a Rack
Ensure that you have the following tools and parts available:
• An ESD grounding strap—not provided.
• A pair of side mounting brackets that attach to the chassis—provided with the rack mount kit.
• A pair of front and rear mounting rails that attach to the rack posts—provided with the rack mount
kit.
To mount the device on a four-post rack:
1.
Place the switch on a flat, stable surface.
2.
Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the
other end to a site ESD point.
3.
To attach the side mounting brackets to the chassis, align the keyholes on the mounting brackets
over the shoulder screws on the chassis. Slide the mounting brackets toward the rear of the chassis.
IN THIS SECTION
Install the QFX5230-64CD Switch in a
Rack | 2
Connect to Power | 7
2