Intended Use Of The Trizaic Uplc System; Calibrating The Trizaic Uplc System - Waters TRIZAIC UPLC System Manual

Intended use of the TRIZAIC UPLC System

Waters designed the TRIZAIC UPLC System to analyze sample-limited
proteomics applications at nanoflow and capillary-flow scales. The system
performs separations using the TRIZAIC source module in conjunction with
®
SYNAPT -series and Xevo
source accommodates a nanoTile™ ceramic chromatographic device, which
incorporates a trapping channel and an analytical channel.
The TRIZAIC UPLC System is for research use only and is not intended for
use in diagnostic applications.

Calibrating the TRIZAIC UPLC System

When calibrating mass spectrometers, consult the calibration section of the
operator's guide for the instrument you are calibrating. In cases where an
overview and maintenance guide, not an operator's guide, accompanies the
instrument, consult the instrument's online Help system for calibration
instructions.
ISM classification
ISM Classification: ISM Group 1 Class B
This classification has been assigned in accordance with IEC CISPR 11
Industrial Scientific and Medical (ISM) instruments requirements. Group 1
products apply to intentionally generated and/or used conductively coupled
radio-frequency energy that is necessary for the internal functioning of the
equipment. Class B products are suitable for use in both commercial and
residential locations and can be directly connected to a low-voltage,
power-supply network.
®
-series mass spectrometers. The TRIZAIC UPLC
v