Understanding The Status Leds - Intermec CN4 User Manual

Understanding the Status LEDs

CN4 Mobile Computer User's Manual
The status LEDs above the display show the following information:
Good Read LED and
Intermec Ready-to-Work indicator
Notification LED
Understanding the LEDs
LED
Notification
Good Read
Ready-to-Work™
indicator
The Ready-to-Work indicator (blue light) is for SmartSystems
Foundation, which is part of a wireless network using all Intermec
devices. Selected application software programs may also use the
indicator for other purposes. For more information, see
the CN4 With SmartSystems Foundation" on page 44.
Note: The blue light may stay on for up to 30 seconds, but will usually
turn off after less than 10 seconds. During this time, do not toggle the
CN4 on or off and do not remove the battery. If the computer seems
to behave erratically, first try warm booting and then cold booting the
CN4 as described in
Battery status LED
Color Description
Orange The CN4 is notifying you of a pending alarm
or message. For more information on the
Battery Status LED, see
Battery Status LED" on page 6.
Green The CN4 has successfully decoded a bar code.
Blue The CN4 is suspending or resuming with the
display turned off.
Intermec Terminal Emulator (ITE) is running
and connected to the host.
Blinking ITE is running but not connected to the host.
blue
Off ITE is not installed or not running.
"Resetting the CN4" on page 97.
Chapter 1 — Using the CN4
.
"Understanding the
"Managing
23