Verify The Network Configuration - Intermec 6400 User Manual

Quick Start

Verify the Network Configuration

" NOTE:
x 6400 Computer TCP/IP Client User's Guide
b. In the host table file, enter the following:
127.0.0.1
<host IP address>
(For example: 192.168.5.40
c. For the host name" parameter in the terminal
emulation configuration menus, enter the variable
located in the host table file followed by a space and
then the port number on which the host application
resides. (To open the menus, press the yellow shift
and blue shift keys.) Example: x 1234
d. Configure the other terminal emulation parameters
as desired.
For more information about 6400 TCP/IP client options, see
Section 2 in this user's guide.
The access point must be properly configured and running before
you can use the 6400 computer for communication.
2.4 GHz OpenAir radio: To verify that the 6400
"
computer is synchronizing with an access point, type
proxstat at the 6400 computer's DOS prompt.
Type chgparms to open the 6400 TCP/IP client DOS
"
configuration menus. Verify all configuration settings.
Perform ping tests:
"
Ping the access point from the server (host).
"
Ping the access point from the 6400 TCP/IP
"
client.
Ping the server (host) from the 6400 TCP/IP
"
client.
Ping the 6400 TCP/IP client from the server
"
(host).
For more information about troubleshooting network
connections, see Section 3 in this manual.
LOCALHOST
<variable>
x)