Turning On the Phone Using the Wireless Manager
Activating the UMTS Radio
CS40 Mobile Computer User's Manual
You can use the Wireless Manager to enable and disable Bluetooth,
Wi-Fi, and the phone on your CS40.
To turn on the phone using the wireless manager
1 Tap Start > Settings > Connections > Wireless Manager >
Enable > Phone. The phone turns on.
2 Tap the Personal tab, and then tap Phone to configure the
phone. For help, see the next procedure,
Radio."
3 Tap Done to close the Wireless Manager.
You use a SIM card to activate the UMTS/HSPA phone on your CS40.
You can purchase the SIM card from your network provider.
To install the SIM card and activate the UMTS radio
1 Tap Start > Shutdown to turn off the CS40.
2 Push the battery release tab forward until the battery releases, and
lift the battery away from the computer.
3 Open the card access door.
Chapter 2 — Connecting and Configuring the CS40
"Activating the UMTS
31