Attaching A Tab To The Sd Card; Accessing Files Stored On The Sd Card - Intermec 741 User Manual

Chapter 1 — Using the Computer

Attaching a Tab to the SD Card

Accessing Files Stored on the SD Card

20
The SD card, as ordered from Intermec, come with acrylic adhesive pull
tabs. If you are using a storage card that you plan to remove from the
computer, this tab can make its removal easier.
Do the following to attach the tab to your storage card. Note that the pull
tab has divots cut into either side, towards the shorter end. Use these divots
as a guide.
To attach a tab to the SD card
1 Completely peel the paper off the short end of the tab. Partially pull the
paper off the long end of the tab away from the divots. Fold the short
end under, at the divots, to stick to itself.
Long end of pull tab
2 Align the folded edge of the pull tab where there is no adhesive with the
bottom end of the storage card. Peel away the rest of the paper from the
long end, then firmly press down the remaining adhesive area of the tab
onto the storage card.
3 Insert the storage card, with the contacts facing the keypad, into your
computer to ensure that no adhesive is exposed once the tab is placed.
4 Press on the storage card until you hear a click. If necessary, you can
reattach the storage media access door.
When inserted in the computer, the SD card appears as the "\SDMMC
Disk" folder. To access this folder, select My Computer, then tap the
"\SDMMC Disk" folder.
741 and 751 Mobile Computers (Windows Mobile 5.0) User's Manual
Fold line at divots
Short end of pull tab
Align the folded end with this edge of the storage card
Keypad facing down