Bacnet/Ip Objects Supported; Bacnet Interoperability Building Blocks (Bibbs); Pv Access; Supported Properties Of Objects - YASKAWA BACnet/IP JOHB-SMP3 Technical Manual

No. Name
U6-95 OPT SPARE 2
U6-97 OPT SPARE 4
U6-98 First Fault
U6-99 Current Fault
7

BACnet/IP Objects Supported

◆

BACnet Interoperability Building Blocks (BIBBs)

A BACnet interoperability building block is a collection of one or more services.
BIBBs that are supported by the JOHB-SMP3.
Item
DS-RP-B
DS-WP-B
DS-RPM-B
DS-WPM-B
DS-COV-B
DS-COVP-B
DM-DDB-B Device Management
DM-DOB-B Device Management
DM-DCC-B Device Management
DM-RD-B Device Management
DM-TS-B Device Management
DM-UTC-B Device Management
◆

PV Access

The Present Value (PV) of BACnet objects can always be read. Some PVs can also be written or commanded. A
commandable PV is almost the same as the writable PV, but the value is actually written into a priority array. The
value that has the highest priority in the array will be used by the drive.
PV Access
C
R
W
◆

Supported Properties of Objects

Property
Active_COV_Subscriptions
Active_Text
APDU_Timeout
*1
COV_Increment
YASKAWA SIEP C730600 0MA BACnet/IP Technical Manual
Shows CN1B Port 2 duplex setting.
Shows the BACnet/IP-specific software version. (when DIP switches are set for BACnet/IP)
Shows overall JOHB-SMP3 software version (when DIP switches are all OFF)
Shows first option fault.
Shows current option fault.
Table 7.1 BACnet Interoperability Building Blocks Supported
Category
Data Sharing Read Property – B (Client)
Write Property – B (Client)
Data Sharing
Data Sharing Read Property Multiple – B (Client)
Data Sharing Write Property Multiple – B (Client)
Change Of Value – B (Client)
Data Sharing
Data Sharing Change Of Value Property – B (Client)
Dynamic Device Binding – B (Client)
Dynamic Object Binding – B (Client)
Device Communication Control – B (Client)
Reinitialize Device – B (Client)
Time Synchronization – B (Client)
UTC Time Synchronization – B (Client)
Table 7.2 Present Value Access Types and Descriptions
Name
Commandable Value written to a priority array. The highest priority value in the array is then written to the drive.
Readable Value is read-only.
Writable Value written to the drive
Table 7.3 Object Properties
Analog Input
Device
Yes
-
Yes
-
Description
Description
Object Type
Analog
Analog Value
Output
(AI) (AV)
(AO)
- - -
- - -
- - -
Yes - Yes
7 BACnet/IP Objects Supported
Table 7.1 shows the list of
Description
Binary
Binary Input
Output
(BI)
(BO)
- -
Yes Yes
- -
- -
Range
100: 100 Mbps
0: Half/Half
1: Full/Full
-
-
-
Binary Value
(BV)
-
Yes
-
-
23